This is config file description for EasyDABv2 board with firmware firmware_gain_516086.tar.gz. Other firmwares
may contain small changes in formula of calculation output frequency and CCI interpolation rate.

Use get_config.sh and set_config.sh helper scripts to manipulate with binary config. This scripts reads/writes
board's configuration, which is located at address 0x070000 and have size 256 bytes. The config will be saved
to file b_070000 and can be directly modified by binary editor.

Config file contains 256 bytes of the data, where hex or dec representation of bytes - are:
###########################################################################################
var default_config = [
0x80, //reset eth
192, 168, 1, 1, //gateway IP-address: 192.168.1.1
255, 255, 255, 0, //netmask: 255.255.255.0
0x00, 0x08, 0xDC, 0x01, 0x02, 0x03, // MAC-address of the device. Note that MAC[0] must be 0x00 and MAC[1] must be 0x08! MAC: 00:08:DC:01:02:03
192, 168, 1, 2, //device IP-address: 192.168.1.2
0x01, //Sn_MR => MR_TCP (socket is TCP)

0x46, 0xa0, //Sn_PORT (source TCP port): 18080

192, 168, 1, 20, //eti-server's IP-address: 192.168.1.20
0x1f, 0x40, // eti-server port: 8000

04, //04=tcp client, 01=tcp server
0x0E, //DAC: reg id of dac
0x48, //DAC: CCI Interpolation Rate<7:2> Spectral Invert Inverse CCI Bypass.
0xFF, //DAC: Auxiliary DAC Control Register: FULL CURRENT
0x00, 0x00, //DAC: Phase Offset Word
0x54, 0x3A, 0xAB, 0x00, //FTW: 2^32 / (24576000 * 24) * 194064000 Hz (7D) => 0x543AAB00
//Unused OFFSET:
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
//Login-password pair: YWRtaW46YWRtaW4= which means admin:admin password, null-terminated.
0x59,0x57,0x52,0x74,0x61,0x57,0x34,0x36,0x59,0x57,0x52,0x74,0x61,0x57,0x34,0x3D,0x00,//OFFSET:
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
// ZeroMQ query string:
0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x7f,
0x03,0x00,
0x4e,0x55,0x4c,0x4c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
// ZeroMQ query after handshake:
0x04,0x19,0x05,0x52,0x45,0x41,0x44,0x59,0x0b,0x53,0x6f,0x63,0x6b,0x65,0x74,0x2d,0x54,0x79,0x70,0x65,0x00,0x00,0x00,0x03,0x53,0x55,0x42,
0x00,0x01,0x01

];

On this sample, config will be:
00000000  80 c0 a8 01 01 ff ff ff  00 00 08 dc 01 02 03 c0  |................|
00000010  a8 01 02 01 46 a0 c0 a8  01 14 1f 40 04 0e 48 ff  |................|
00000020  00 00 54 3a ab 00 ff ff  ff ff ff ff ff ff ff ff  |..`C............|
00000030  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
00000040  59 57 52 74 61 57 34 36  59 57 52 74 61 57 34 3d  |YWRtaW46YWRtaW4=|
00000050  00 ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
00000060  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
00000080  ff 00 00 00 00 00 00 00  01 7f 03 00 4e 55 4c 4c  |............NULL|
00000090  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000000c0  04 19 05 52 45 41 44 59  0b 53 6f 63 6b 65 74 2d  |...READY.Socket-|
000000d0  54 79 70 65 00 00 00 03  53 55 42 00 01 01 ff ff  |Type....SUB.....|
000000e0  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
00000100
###########################################################################################